DIY Coat Rack Wall

simple diy coat and hat wall

I’m always on the lookout for ways to improve spaces in my home.

Sometimes it’s a better way to organize an area, but more often, it’s an idea to make a space prettier and more functional.

I had this idea for our tiny back entrance that I’ve wanted to do for a while.

So….I asked for my own power tools for Christmas and this became my first solo DIY project.

coat rack made from peg rail

Let’s take a look at how this space looked before.

It was sorta functional, but hats and coats were all hung on the same peg rack and would often times be on top of one another, which caused them to fall.

coat rack needing improvement

I looked around the house at supplies I had on hand and found some left over peel and stick wall boards I had saved from my Timberwall project in the dining room. This gave me an idea and I came up with the perfect solution to make this space not only look better, but function better for my family.

Nordic Ice Mist wall boards by Timberwall

Use Peel and Stick Boards to Transform a Blank Wall

Peel and stick wall boards are so easy to use. After you remove the paper adhesive from the back of the board, you simply align it to the wall and press it on to the wall surface, holding for a few seconds to ensure it sticks. Of course, you need to also make sure your wall surface is clean and dust free.

The hardest part of this project for me was cutting the boards the needed length. That’s because this was my first time using a saw on my own. I used my new reciprocating saw from Hart Tools and caught on pretty quick. Fortunately for this project, they all needed to be basically the same length.

I’d also be adding trim pieces to the edges and a 1 x 3 to the top for hooks to give it a finished look. And let’s not forget that caulk is your best friend!

white peel and stick wall boards are good for simple diy project

I started with the bottom board and worked my way up. I used a level to make sure my first few boards were level as I went up and before I knew it, I was a little over half way up the wall.

hart power tools

I wanted the top of the boards to stop at a typical “board and batten” height, a little over half way up the wall. Next, I drilled pilot holes so I could use anchors to secure the board that would hold the iron hooks.

using hart tools on diy coat and hat wall rack

This way, I could be certain that the hooks could hold the weight of multiple coats.

peel and stick wall board project

Because walls will never be perfectly square, sometimes peel and stick boards do not stay in place as they should. Because of this, I chose to use a nail gun to secure them.

ryobi nail gun used to secure wall boards

After that, it was time to paint the boards. I used my favorite white paint, Whisper White by Behr in a satin finish.

whisper white paint by behr

Using a brush, I gave the boards a couple of coats of paint and allowed them to dry.

painting peel and stick wall boards

Two corner trim pieces were cut for the sides and painted as well. Then I caulked the edges and put the black iron hooks in place. I found my hooks at Walmart and loved the fact that these provided a place to hang two jackets each.

peel and stick wall boards by Timberwall

I didn’t want to make the same mistake as before and try to hang hats on top of coats, so I used the same peg rack that was on the wall before. I just gave it a quick coat of Rust-Oleum flat black spray paint to match the coat hooks and hung it high enough so that the hats wouldn’t touch any coats.

My First Solo DIY Project

And that was it! Such a quick and easy project that can be completed on any weekend….even in one day.

diy coat and hat racks

Now we have a much prettier and more functional space for the many coats and hats that always end up in the kitchen.

I hope you’ve enjoyed seeing my first solo DIY project. But I’ve got some good news for you! Todays is our monthly “It’s Good to be Home” Blog Hop.

Be sure to visit each of the links below to see the other fun ideas my friends are sharing.

JENRON DESIGNS/ Robyn’s Southern Nest/ At Home in the Wildwood

The Frugal Homemaker/ Southern Spangled/ My Weathered Home

Similar Posts

15 Comments

  1. Oh My WORD – I just LOVE the way that it came out and how great it looks! Bravo my friend!

    1. Thanks, Emily! I’m super happy with how it turned out….especially for my first time doing a solo DIY project 🙂

  2. You did a great job, Lynn. It looks beautiful! I’d love to share a link to your DIY in my week in rewind recap post this weekend.

Leave a Reply

Your email address will not be published. Required fields are marked *